Skip to main content

Reply to "GT5 control arms."

Robert,

I thought you had the modified a-arms already?

All Pantera's (except the later Si) use the same a-arms. The only thing that was changed was the wheel width and offset, moving the width of the wheel further out rather than over the centreline, which leads to the tramlining and bump steer issues.

Std GT5 front wheels are 10" width, it sounds like you have a narrow body rear 11" wheel spaced out to meet front GT5 needs. IMO using 32mm of spacer is not something I would be comfortable with and puts a lot of stress on the wheel studs.

Can you measure and post the back spacing on your wheels?

Julian
×
×
×
×