Reply to "H4 Bulbs"

nazgulMember

i picked up rich boshcert's relay kit, and must say it is very nicely done, well worth the bucks.

but.........., as i understand the wiring diagrams, what is the point of passing the headlights current through the old fuses? just seems a bit more efficent to hardwire from the relay #12 wires straight to the headlights.

the only difference i see is that previously each headlights hi and low beam was protected by an 8amp fuse, (total of 4 fuses) where if wired directly from the relay the lamps would then be protected by 2 20amp fuses (one for the lows and one for the highs) which should be more than enough unless your running aircraft landing lights.

also, you get to pull and toss out fuses 1, 2, 5 and 6 (though a bit of rewire for the hi-beam indicator is needed) plus you get rid of some of the wiring mess around the old fuse box.

am i missing something here?????????

nazgul

7/20/077:24 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...