Reply to "Hazard switch wire description"

Here ya go, Michel.


Hazard Warning Switch Wiring

Green: To term #30 from fuse #8. This wire is unswitched.

Yellow: From term #49 of the hazard switch to term #49 of the flasher.

Term #30 is only connected to term #49 when the hazard switch is in the ON position.

Red: From fuse #12 to term #15. This wire is switched (ignition switch in the run position)

Term #15 is only connected to term #49 when the hazard switch is in the OFF position.

Pink/Black: From term #49a of the turn signal flasher to term #49a of the hazard switch and to the turn signal switch.

Light Blue/Black: From term L to the turn signal switch, dash indicator light, and the front and rear turn signals on left side of car.

Light Blue: From term R to the turn signal switch, dash indicator light, and the front and rear turn signals on right side of car.

Term L, R, #49a, and the internal light are connected together when the hazard switch is in the ON position. There is NO connection when the hazard switch is in the OFF position.

Yellow/Black: From the instrument light dimmer to term #59d. This feeds the resistor (usually on the back of the hazard switch) that goes to the internal light of the hazard switch.

Black: From term #39 to ground. This is the ground for the switch’s internal light.

Let me know if you have any more questions.

John