I fixed it!...kinda.
I figured by contacting the pink/black to red it will then feed the turn signal switch.
Problem with mine was it would not stay in and was not providing continuity for the above function.
I opened it up and ran a fine dremel stone at low speed over the terminals to 'clean' them up.
Then I wedged a small piece of cardboard behind the copper band that the little arm slides accross as part of the cam mechanism that keeps the button in place.
I now have turn signals...but,when I engage hazzard,no four ways???
Oh well,my needs have been met for now.But I will likely take the member up on one of his new switches once I have taken the time to figure out what is the problem.
Thanks all!
Craneman
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.