Head Milling.

webbers1972 Pantera, Restored. How do I put pic on here?

I have a 1972 351C. Cam is 536 lift. Closed chamber 2 bbl. 2.19 Valves. Flat top pistons. I`m told Compression is anywhere between 9.7 to 10.5. I`n any case, That`s High test Territory. The Engine is 30 over. It sucks to be Paying for High Test on a Low HP Engine like this. How much more Hp Can I get if I Milled the Heads? I was told if I milled 8 thousandths off, That`s worth a Point of compression. Any Ideas?

5/8/1212:27 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...