Reply to "header insulator"

bosswrenchMember

Stock Ansa mufflers didn't have packing inserts in the tips. There is a final baffle inside the muffler that can be removed with some difficulty, to approximate the sound and flow of a GTS muffler, by ramming a pipe down each chrome tip and whacking it with a hammer! The 'baffle' is a large washer tack welded to the end of a screen-baffle below each chrome tip (4 washers). You are only trying to pop the washer-weld loose on one edge, not break it completely off. If it breaks, you'll have a permanent jingle-bells effect at idle unless you cut the case apart & retrieve the loose par(s). All this is better done before Jet-Hot coating, obviously.

6/17/0311:30 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...