Reply to "header insulator"

marlinjackThe Machinist #5723 AMARGOSA MACHINE 'Running on Empty- Middle of Nowhere'

I would imagine that the perferated tube you are discribing was welded into the assembly as the whole muffler was being put together. If you really want them out of there! I myself might try: 1. A SMALL diameter cicular AIR driven saw/or grinder, on an extention. 2. An acetalene cutting torch, with a very small tip to reach in and just melt away at the mounting of the inside tube. Ofcourse, this method may cause a discoloraion of the chrome tip. 3. Reach in with a steel bar and leverage/bend the tube back and forth, back and forth until it just snaps off the welds. I have these mufflers off my car, (I installed the P.I. Stainless Steel 2 1/4" units), and since the output diameters (on the stock mufflers), are really quit small, you probably will not see a noticable performance gain. Although your intent is for a slightly louder sound, this, you may accomplish. Good-Luck, Marlin.

[This message has been edited by MARLIN JACK (edited 06-18-2003).]

6/18/037:55 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...