Hi Guys,
I was not as clear as I could have been.
The problem is this. With motor drive gear not touching the ½ moon gear connected to shaft 67, there is no load on motor or motor gear. So with no connection to motor at all, the problem is I cannot move shaft that raises the doors.
The door opening shaft, 67, won't rotate to raise the doors. This is with NO CONNECTION or load of any type on the motor or motor gears. Shaft 67 is isolated from the motor and gears.
There is something that is stopping shaft 67 from rotating to open the doors.
Does that help
Steve
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.