Reply to "Headlight Switch Wiring is goofed up"

jb1490Member

quote:
I copied your diagram and took it down to the garage and changed the wiring over and bingo everything was in working order

I love it when a plan comes together.

Before you take anything apart, try putting a jumper wire across the down limit switch. It is the rear switch with the green and brown wires. The headlight switch must be OFF, and the ignition switch must be on (ACC or Run). Then connect the jumper wire across the two switch terminals. You should be able to do this with the wires connected to the switch. Otherwise, connect the jumper to the wires. Also, try to wiggle or tap on the switch or press on the switch arm before trying the jumper.

5/28/098:35 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...