Skip to main content

Reply to "heim joint / trunnion"

I haven't had any issues using the 18mm igus composite rod end since I installed it in 2004. 

igubal® rod ends are corrosion-resistant can be used without problems in harsh environments. In moist or wet environments, they are resistant to weak acids and alkalines. Their resistance to dirt and dust should be noted.
 
Housing made from igumid G, an extremely impact-resistant, long-fiber-reinforced polymer. Suitable for temperatures from -40 °C to +90 °C in long-term use.
 
The spherical ball is made from iglide® L280 material, which is known for lowest coefficients of friction in dry operation and extremely low tendency to stick-slip. This is especially important for low loads and very slow movements.

  • Maintenance-free dry operation
  • No lubrication
  • heavy-duty
  • Very high durability in varying loads
  • Compensation of misalignment errors
  • Compensation of edge loads
  • Resistant to dirt, dust and lint
  • Resistant to corrosion and chemicals
  • High vibration-dampening
  • Suitable for rotating, oscillating and linear movements

Trunion_Rod_End_[640x240)

151x151x2

Attachments

Images (5)
  • Joint_Installed
  • Rod Endx
  • 151x
  • 151x2
  • Trunion_Rod_End_(640x240)
×
×
×
×