Vicramos,
The dimensions I found are the following:
OD .950
Width .620
I purchased my nylon rod stock from Grainger.com and cut it down to the appropriate width. I think I still have the left over length floating around at my shop. I can look for it's part number when I get back to town if you want. I think I may have gone with the "1" diameter because of not finding .950 in the appropriate temp/grade.
Also, I remember looking at Grainger's brass rod stock since some vendors sell "brass rollers" but I ended up going with the nylon due to the $5 price in case it did not work.
Good luck and let me know if you need any further info.
Devin
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.