Reply to "Help, Pilot crank incert trouble...."

plt-1Member

The hyd. method was used to remove the pilot roller bearing. This incert has only a mild seam and is almost a flush, I don't think there is enough surface area to push it out. At this piont I would just like to confirm this proceedure... I.E... Does this incert come out??.. Is there any other methods availible besides wet paper/grease or a bearing puller??... Do I understand this evolution correctly??... I don't want to start getting rough with it until I have a clear understanding

.... Thanks for any help/advice...

8/15/104:34 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...