quote:Also sometimes me directionals won't work unless I hold a little pressure on the Hazards button.
That is a very common problem, and a very common solution.
What some owners do is gently wedge the button in the right position, using a toothpick or something similar.
That switch has an absurd number of wires going into it. If you attempt to check or replace it, pay VERY close attention to which wire goes where, double checking each wire color and position.
As for your high beams, some owners jump the wiring to give both beams at all times. As a first check, I'd check for such jumpering on your car.
Diagram is for late cars. See panteraplace for the early version.
Larry
