Reply to "High oil pressure"

panteradougMember

Veglia electrical gauges are mixed here with Ford senders and as a result are not spot on.

I agree with Marlin. You don't have a problem. Now if you were ONLY showing 10 psi at idle, THEN you should be concerned.

You just calibrated the oil gauge by your test. Leave it all alone. It's ok.

Incidentally, the Veglia tachs are often off 300 to 600 rpm. There that actually is the tach, not a sender BUT you can have them calibrated as well.

Jon Haas also has a calabration adapter for the temp gauge, which I hate to mention this, but stock is off quite a bit. I don't think he's done anything for the oil pressure but you might want to ask him over at Pantera-electronics.com.

Apparently to many who visit here, he's a mystery? It isn't Jon who hides under a rock but apparently too many Pantera owners do? I could never figure that out? Most HAVE heard of electricity and the internal combustion engine but not much else?

3/21/211:52 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...