Reply to "Hole in Hood (not head)"

comp2Member

It's a manual change in the duct position. It is either bolted up or down.

The problem at this point is required airflow is a guess but I still needed to go forward with enough fabrication I could move to paint. The hood still needs a little finish work.

I have changed so many things the ratio of screen to vent could change after I get it going. I have to see what it does.

One goal I had was to close off all under car exits for the air through the radiator. No air goes out the bottom nor into the wheel wells. All air goes out this hood.

Added to the mix is a trans cooler where the air conditioner was and an oil cooler where the gas tank was. Both of these will help with temp control as well.

2/24/095:18 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...