Hub Seal Seating

I have been redoing my front end.  When I put in new bearings and seals I added the dust shield.  When I dismantled my car the dust shields weren’t there.  I purchased the sacc wilwood Kit and  and have those rotors on the hubs.   I mounted the hubs and they appeared to seat well. However, when I added new wilwood calipers they were not centered well, especially the drivers side. I am wondering if the hubs are not seating all the way on the spindle, maybe because I didn’t put the shields on right, or should have left them off all together. I have included three pics, two showing what I think my be a gap between the hub and the spindle, and one where I included the dust shield.  Is that gap supposed to be there or am I not seating the hub correctly. 

 

Thanks 

 

5E0E1B33-B632-4749-92E9-C9FDF8C0DC3664FFD7DC-82FE-48FB-B121-E39BC771C3A6C9438804-6CF9-4156-AB4E-12FF5597392E

Attachments

Photos (3)
Original Post
×
×
×
×