Reply to "I had to pull my engine"

rapidMember

Well I have my engine back and it is back in the car and should be ready to roll by tomorrow.
I had the engine bay repainted while the motor was out. I repolished the ZF and had the overdrive fifth gear installed, (also had to replace the ring and pinion while everything was apart). Rebuilt the engine, (apparently the company that rebuilt it before took some real shortcuts). Had the heads and manifold reported and flowed and port matched. Went to a larger fuel pump (Edelbrock 110 gallon pump), and right now Les Gray is reworking my fuel tank assembly for the larger fuel lines on the sending unit etc.. Then we had to replace the clutch master cylinder, which decided to go out while sitting idle. Also installed new clutch assembly and aluminum flywheel. And had the 180 degree headers recoated by HPC.
Here are a some photos of the motor.

Attachments

Hide

Images (1)

9/17/087:46 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...