Reply to "IDEA FOR WINDSOR BASED MOTOR"

accobraMember

So your in suffern I am too email me ronmarl@optonline.net

quote:
Originally posted by DJEZC:
I had the following idea for a Windsor based motor that I would put in a Pantera.

Block - Dart, 4 bolt main aluminum. Set up as a 408 stroker. Would there be issues with regard to the normal pulleys and acessories? I would want a Gilmer belt drive system.

A cast steel crank, h beam connecting rods,

Heads - Arao engineering 32 valve aluminum heads. Compression ratio 10.0-10.5 to 1.0.

Cam - I would like input from the members on the board.

Ignition - Electronic, please provide suggestions.

Fuel delivery - A cross ram fuel injection set-up similar to that on Asa Jays Pantera page on the internet. Is there one out there for a Windsor based motor?

I am shooting for a very streetable normally aspirated 550+ horsepower, with a very broad torque band.

Please let me know what your thoughts are, what I need to think about that I am not, etc.

Thanks everyone!

11/14/042:49 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...