Peter,
The red wire from the nylon connector goes to the top left terminal of the resistor.
The bottom left terminal of the resistor goes to the BAT (+) terminal of the coil.
The blue wire form the nylon connector goes to the top right terminal of the resistor.
The bottom right terminal of the resistor goes to the NEG (-) terminal of the coil.
The wire to the distributor points should be (factory) connected to the blue / black wire that is in the other half of the nylon connector, which is not visible in your pic.
John
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.