Reply to "IGNITION SWITCH FOR SALE"

mangustaMember

OK, let's try that again....

The switch referenced in the auction will NOT fit in the Pantera.

While the electrical portion on the backside will work, you must cut off the connector as mentioned.

The only other piece that will work is the tumbler assy, IF you know where to drill the hole to release the tumbler from the assembly!!! While it will fit and operate, it appears that it takes a different key blank! I don't have one in stock to check it any further...

The inner diameter of the mounting hole is too small on this earlier switch. It will not fit around the steering column.

Here is a shot of the two side by side. Correct Pantera switch is on the RIGHT. I blew up one of my other photos, and they both carry the same casting number 70EB 3675 but one ends in B1 (70 version) and the other in B10 (71 version). I've gotten word of a Mangusta with a steering column mounted igntion switch...should be interesting to find out which one was used there!!!!

Attachments

Hide

Images (1)

12/5/091:13 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...