Skip to main content

Reply to "Ignition System Mess"

quote:
another solution maybe the pantera electronics ignition.
http://www.pantera-electronics.com/eis.htm
It does not need a tach adapter and has other functions too. Jon would likely be able to help you out with many of your needs, even just with some tech help to get you through a wiring mess.

Two enthusiastic thumbs up for Jon Haas and his Electronic Ignition System (EIS) - and all his products for that matter! I have the EIS in my car and it's great!
  • 100x faster than an MSD box
  • Will fire a wet oil-soaked plug
  • No tach adapter required
  • Not susceptible to failure if you weld on your car or jump start your car with a booster back
  • Controls/synchronizes distributor advance with the ignition
  • Controls the electric choke on your carb
  • Will control an electric fuel pump, if you have one
  • Has an AC shut-off function to turn off the AC if you get on hit hard (getting you back those extra horsepower!)
  • Has a user settable rev limiter, without needed to buy "pills" to change it
  • Has dynamic idle control to adjust your idle when the AC kicks on
  • Has diagnostic LED lights which tell you if all systems are properly hooked up and powered
  • Is impervious to engine compartment heat - the MSD and Mallory boxes often die as a result of heat, like my old one did
  • Comes with the best tech support, bar none! Jon is an electrical wizard and will walk you through the steps necessary to accurately diagnose any issues or verify you've installed everything correctly

Oh, and you can use your existing MSD Blaster 2 coil with Jon's EIS system.
×
×
×
×