Reply to "In Line Water Temp Sensor"

murrayreidMember

Reply to Larry ....

Yes, my sensor is fitted into the steel pipe out from the engine to the rad. I can't fit anything in the original location as the take off for the oil cooler fouls the location for the water sensor. The solution I was hoping for was to fit a sensor into the rad water pipe as I have said.

I have fitted one from a TVR (British Blackpool Sportscar) but the temp dial reads far too low. The resistance of the sensor is 1000 ohm. What I was hoping to get was a low resistance sensor and then add resistors to it in order to get the gauge to read 200F when the radiator fans kick in.

My problem is that none of the website I have found here list the term voltage and the sensor resistance of the sensors and I was wondering if anyone knew of, or had used, a suitable sender they could recommend.

Thanks .... Murray

1/27/161:10 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...