Reply to "Increasingly high oil temps"

cozMember

It's a simple job Comp....Remove the fuel lines, air cleaner, throttle cable and any hoses. Leave the carb on and remove the manifold. You may have to loosen one of the valve covers. Pick the easiest side for you if you do. Make sure you clean all the surfaces before putting the new gaskets on. There is also a bolt tightening sequence for the manifold. If you don't have it, let me know and I'll post it for you.

Should take you about 2 hours. Once completed, let it sit for a couple of hours giving the RTV on the ends a chance to set up before you start it up.

quote:
Originally posted by comp2:
I hope it's that simple. Don't seem to be having any other problems. I hope to get to it this weekend but I have a Ford 8N for mowing. I am putting in a new engine right now and I refuse to tear down too many vehickles...vehikles....ve..dagnabit,,,,,,,Cars...and tractors!

6/18/0512:47 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...