Input needed, Swirl system mock up

jerrysrMember

Tackling the self bleeding-swirl tank set up. This is what I have come up with after scouring posts and articles.

I am going to use the original system tank as is as a swirl tank. Install NAPA BK 7031419 4lb pressure cap or cap with no lower gasket (only sealing at the top lip)

Run a 1/4 hard line with hoses from the port in the upper level of the overflow to a nipple in the left upper corner of the radiator.

My concerns are; I didn't read anything stating exactly how much higher the overflow should be mounted. Will my mock up height be adequate?

Any suggestions for a replacement spacer for the void between the flat body and curved overflow tank? Upon disassembly what ever it was, crumbled to pieces so I don't have a sample.

If you see any Red flag areas please let me know.

JerrySr

Attachments

Hide

Images (3)

11/8/238:32 PM

Original Post

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...