Reply to "Input needed, Swirl system mock up"

jerrysrMember

I wrote out a detailed (detailed in my mind) plan on function and layout so I could wrap my head around the concept. What I think is overlooked is that the flow in the tanks and the radiator are reversed in the self bleed/swirl tank mod.

As I understand it, in the original config Rene would be correct but reversing the flow changes everything. Again this IS my first RODEO (Pantera) and these are my Monkeys (mock-up) lol. Any input is welcomed 😁

Rocky I hoped the tank elevation would be good, filling the system is tough enough I'll bet. " I've only done it a couple times and that was this car, 42 years ago ! " Keeping the system tank cap will help maintain a stock look and give me better access to mostly fill the system.

Any concerns of leakage with the gasket only cap should be addressable. I know I have seen simple swirl tank caps with no relief spring and lower seal over the years I simply can't recall what vehicles

11/9/238:28 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...