Reply to "IR injection maintenance"

I haven't messed with the linkages or throttle yet.

I used my unisync tool and all holes were close enough to each other to not need to touch anything.

I also found out just how sensitive the system is, micro screw adjustments made big changes so I put everything back exactly how it was. I actually lucked out and it idles and tad smoother now lol.

I'm having issues with my throttle sticking, but I have to check my pedal and cable first before anything. Once those check out, I may look into having an expert adjust the linkages and hopefully tune my ancient Haltech ECU.

I believe my pedal or cable is hanging up on the side center console cover. This issue arose only after I removed and reinstalled the console side cover.

The way this car has been going, I touch one thing, and it causes 10 new problems, so presently I'm going to inspect things VERY closely, as I CANNOT have a sticking throttle, obviously.

The spring, and all linkages are as I bought them, so I have no way of knowing if anything is correct, but it's good to know I should lube my heim fittings.