Skip to main content

Reply to "IR injection maintenance"

quote:
Originally posted Panterror



Just replace the O-rings. It’s a 15-30 minute job to remove the rails, measure and buy a couple 25 cent O-rings. If you remove the two underside screws that mount each fuel rail, both rails on the bank will lift off the injectors and then use an offset or ratchet screw driver to remove the inside retaining caps. –Replace O-rings reverse assembly.




If the fuel rails are removed you won't need a ratchet/right angle screwdriver.

Simply twist the two halves along the axis off the rails so they are not in line.
×
×
×
×