The injectors are held to the rail by clips. They all seem pretty loose in the rail.
The lower O-rings that plug into the manifold all look good.
In getting the rail off, I yanked upwards pretty hard to get the rails up and injectors out of their holes.
Should have have an injector shop redo the top injector O-rings? Is it normal for the injectors to feel loose in the fuel rail. There's clips that hold them to the rail, so the rail and injectors came off as an assembly.
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.