Reply to "Is it possible this thing works?"

Yes Marlin but the Weiand TR has what 8 to 10 inch runners? This new manifold HAS NONE! It is just a big plenum with a dual four mounting plate.

I doubt it would give the torque to pull the tires off of the ground at any time BUT no one seems to have run it yet.

FYI, the Shelby Boss 302 2/4 and the Ford 289 2/4 T/A intakes are high risers too. Very much like the manifold Miller has in the picture.

The question with that manifold is that is the only place most of us have ever seen it and the angle of the picture doesn't clearly show if it is a single plane or a dual plane.

No one is questioning whether or not your set up works because obviously it does. It does look like you made a plenum under each carb so a regular Holley 1050 series carb will work.

The only thing with that setup is you need to idle on two carbs since the front and rear plenums are seperate.

In doing that, you change the nature of the power pulse the overlap on the cam produces and you give up the economy of idling/running on just one two barrel.