Reply to "JESEL ROCKER ARM FAILURE - MME ENGINE"

djezcMember

Jesel thinks that the cup where the pushrod sits may have been overtorqued (Jesel states that this adjuster should not be torqued more than 25 ft/lbs.) causing the body of the rocker to spread over time and eventually fail. The two failed pieces are being sent back to Jesel as we speak and I will have the torque on all the others checked. If they are over 25 ft/lbs they will all be replaced.

Shouldn't have MME known this? When the adjusted the lash they did not use a torque wrench so I know they have no idea what they torqued them to. I was there and watched them when they were adjusting the lash.

7/29/082:50 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...