Reply to "Jtaphorn Cooling system modification"

jfb05177Member

quote:
Originally posted by tajon:

Would like to see the one tank method.

If I wanted a one tank system,

I would cut the pipe from the thermostat to the swirl tank so just to have the elbow.

I would then cut the pipe from the swirl to the lower tubes and turn it to connect with the thermostat pipe. use a hose between the two

in the thermostat elbow, install a high vent and hose it to the longer tank (about mid way)
connect the tank bottom to the water pump suction and put a pressure cap on the tank

the tank needs to have its mid level at the same level as the thermostat elbow

Attachments

Hide

Images (1)

6/27/173:50 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...