Reply to "Just to clarify ??...."

jb1490Member

I purchased my ss tubes from Hall about 8 months ago and have not installed them yet. I looked under the car with the pipe in question in hand. It was hard to tell for sure as the existing pipes are still in the car, but it appears that this pipe has to go through the support bracket with the hose on the forward side of the bracket. If the hose were installed on the rear side of the bracket, besides hitting the e-brake bracket, it appears that it will not line up with the water pump inlet. Kind of hard to tell with the old tubes still installed.

See if you can get a measurement as to where the water pump inlet will be when the engine is installed. Measure from the motor mount to the center line of the water pump inlet on the engine and transfer to the car frame?? This should tell you where the pipe should go.

The ss tube kit may have compensated for the through the bracket positioning by adjusting the forward tube at the radiator.

Attachments

Hide

Images (1)

2/24/098:16 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...