Reply to "Keep Blowing Fuse 12 ignition circurt"

hemihunterMember

I found an uninsulated wire end (yellow) in the centre guage cluster , so i wrapped some tape on it, and fitted the load buddy meter this morning,
Got it up to temp all good , was drawing 0.5 amp, fans cut in went to around 5 to 7 amps , loaded it up with window operation and A/C turn signals etc did not really change from that.
But needless to say test drove it and all seems fine , no blowing fuses.

11/18/1610:04 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...