Skip to main content

Reply to "Koni Shock absorbers for Mangusta"

Found this too....2010, so hard telling if any is still valid!

I want to reiterate this about the Hall Koni shocks that many got!
Aside from the soft gum rubber stock style bushings, these shocks had NO provision for adjusting ride height! If you wanted to adjust the height, you had to install/deinstall spring spacers, or shorter springs...... My car only had the front Koni's and they were good. Never had any experience with the rears.... Frowner

Steve

Hi Steve,
The shocks on the front of my Mangusta were shot so
I e-mailed Koni to see if they had any Mangusta
shocks. They e-mailed me back and said they used to
have some but not anymore, but they could rebuild my
old ones. Thanks to Gary Herrig for this info!
Unknown what solution is for end bushings!

They cost $95. each plus parts as needed (usually
$15-$20). Turnaround time is 5 weeks.
If anyone is interested, they can send them to:
Koni-Na
1961 A International Way
Hebron, Ky. 41048
Attn: Paul



Ciao!
Steve
×
×
×
×