Reply to "Koni Shock adjustment again"

pookyMember

Last weekend I took the front shocks off to adjust them. I had asked the factory to set them to medium stiff (3 or 4 out of 5). They where set to 1 of the softest setting. Since it requred disassembling the upper mount is the only reason I didn't check them out before hand. An after thought would to have been to check them against the 38 year old, 38k mile Telecar shocks I removed which were 10 times stiffer than the 1 setting on the Konis. After adjusting them to 4 the Pan is feeling 1000 times better in ride and performance feel than the 1 setting. Lesson learned, don't trust the setting done by Koni if you spec it and tell them not to install the top mounting support (with the roll pin), you will do it and save you and them the trouble of setting the adjustment. Much easier to put it together than take it apart.
Thanks for the support guys,
Steve

1/26/129:06 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...