Chip,
Remove the red and brown (orange?) wires from the turn indicator bulb socket and cap these wires. Install the diode and ground pigtails to the indicator bulb socket as shown in the instructions. Add two new wires to the remaining ends of the two diodes. Extend these two new wires to the molex connector for the hazard warning switch. Splice one wire into the light blue wire at the molex connector, and splice the other wire into the light blue/black wire at the molex connector. This should solve the problem.
John
PANTERA INTERNATIONAL
A DE TOMASO CAR CLUB
Presents the De Tomaso Forums
The On-Line Meeting Place for De Tomaso Owners and Enthusiasts From Around the World
Clicking on the banner will take you to the sponsor's website.