Skip to main content

Reply to "Lights go up but will not go down"

Trum,Try taking them apart and cleaning them. The two nuts that hold them on are easy to get out and you have to remove them to change them any way. After they are off they just split in the middle with a small screw driver. The insides look like a set of points and are a simple open/close contactor. Just clean them and the connections at the wires real good and re-install. Mine did the same thing when I first bought it and cranking them down by hand sucks. That was 5 years ago and they have worked perfectly ever since. You have nothing to lose, it take about an hour and no parts require.
×
×
×
×