Reply to "Locating bits and pieces"

mkehMember

I got the brake light switch on and working, made my way into the fender well and removed the wiper motor.

I took a shot at rebuilding it, but for some reason I was able to get it working fine in "Slow" but not at all in "Fast", it even "Park"'s correctly... I found it odd that what SHOULD be the direct route DIDN'T work, but the route through a resistor/relay DID work... go figure...

I based the electrical on this article:
http://vitessesteve.co.uk/Luca...2-speed-wiper-wiring

I went ahead and ordered a new motor as it wasn't in the best of shape to begin with. but I'd still like to hear any thoughts on why "fast" failed to work... as far as I could tell electrical was all fine. I had the motor out of the car using jumpers to a battery, so the car's wiring was completely out of the equation.

12/20/179:33 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...