...The Curvature Alignment Revealed. How did I get the Curvature this Accurate?? I placed Both 'Beams', Clamped together, Between Two '4 x 4's', and Stepped on them Jumping 5-6 Times, with My weight at 262 Lbs. Biased towards the Front End. This took a Lot of effort, the Aluminum, although SOFT, was hard to bend. Just what I needed to support 14.7 Pounds of Aluminum, at 160 MPH! When both pieces Must be Curved Exactly to each Other. they must be bent Simultaneously, doing them separately, they would be Impossible to Match!
Next pics, Working on the forward mounting, Hidden. Beams have been shortened to Not show in the Rear...Only the Last Louver will ever be seen in the Rearview. Rubber pads may be used in conjunction with the (2) Magnet, Yoke and Pin, to adjust the final Height of the Twin Beams.
Photos: The First slat to the Mounting, is Fitted. 2nd Slat is checked for fit and Not yet set for Angle.
In the Next Posting of Photos, I will show how All Louvers will be Aligned with 'Absolute Accuracy' !!
Thought you may want to see the Dish Marlin cooked Saturday Night.
'Butcher Shop Pork Chops' 1 Inch thick. Smothered in a 'Caramelized Onion' Cream, Sauce. 3 Chops cut into 6 'Medallions', Sear Very Well on HIGH, Lower to Med-Hi 5 mins per side (NO Pink in the Center), 32 Oz, equal beef/chicken stock. 3 Garlic Cloves, 3 Onions, 4 Heaping Tbs The Best 
Flour on Onions when Caramelized, 1/3 Cup Whole Cream. Top with Rosemary and Tyme. Cooking time 45 Mins. Season Pepper and Salt.
Marlin can achieve many things beside Building a Pantera and 351C Engines. Loves to cook, as well as Play the Violin, Scottish-Irish Fiddle.
Wait until you see What comes Next!!
