Reply to "Low profile billet shift knob"

I've had a few of you ask via PM so I thought I would clarify a couple of things.

Due to the exact sizing of the spacers the emblem will sit straight no matter which spacer setup if any you choose. So, throw the spacers in the glovebox and if the mood strikes you can spin the knob off, add or remove spacers and spin it back on. The emblem is still where it should be. Very cool! Maybe you like a more aggressive, lower knob but your wife (you let your wife drive your car????) likes the taller position, now you can adjust it on the fly.

The spacers allow for about 5/16" of total adjustment up from the starting point. You still must choose either the lowest possible knob or the mid height as a starting point. If you prefer I can do a custom height to your spec's.

I need to know the emblem color when you place your order. I found that the emblems are ever so slightly a different size and I'm very anal about certain things. I machine the recess to fit the emblem you choose so the fit and finish is very good.

Thanks for all the interest.

Steve