Reply to "Mangusta brake and suspension rebuild"

Ben,

You should post the part numbers of the various pieces that you procured. Reason being is that yours is the first car that I have seen with the three piston front calipers. I have an old seal set for a three piston caliper, but not sure if it is for a front Goose caliper, as I've never seen one before!

The rears are the same as on my car. They actually say Fiat-Girling on them. These are unusual. Another one that has them is #822 down in AZ. These were used on Fiat 2300's. My small pistons in them were toast, but the large ones were in great shape! I had to get new parts from Girling in the UK...Thankfully there was a Goose owner that was just about 10 miles down the road from them and he was able to hand carry them over here one year when he attended the POCA fun rally in Vegas! These were the most expensive parts I had ever purchased for the Goose, and also about the first parts I ever purchased...in trying to get the car back on the road!!!!

If you post the numbers, then others will be able to dig them up to from various Girling vendors.

Good stuff!!!
Steve