Skip to main content

Reply to "Mangusta Clutch Help please!..."

quote:
Originally posted by Paolo MA646:
Dear All,
i'm on the way to resolve the clutch on my Mangusta, I've ordered a new kit and I'm now adapting it!... Hopefully will work, I'll keep you posted.
Another question... I need to replace the rear suspension, I did buy new ones few years ago fron the Mangusta International website (now that is gone)the suspension were very low so I added a one inch alloy rise ring which worked fine (till recently!)now one of the suspension broke and I need a replacement...
Any advice where to get a modern good pair of them with the regulation at the end?..
Thanks a lot again,
all the best,
Paolo Italy


Your suspension fix may vary depending on the use case of the vehicle. For example, if you don't intend to drive much and originality is an desire then you could reach out to Springbok in Germany for original equipment.
Otherwise, perhaps find a local suspension/alignment guy and have them make repairs to the existing stuff.
Both of my rear 'A arms' cracked one resulted in catastrophic failure. Luckily the car was only being pushed across the driveway at the time. They were welded over with some larger diameter tubing as a fix.
×
×
×
×