Skip to main content

Reply to "Mangusta Engine Removal and Rebuild"

Back to the jackshaft assembly for a moment...I've always tried to install the jackshaft and intake manifold at the same time, torqueing all bolts in the proper sequence, and avoided removing the jackshaft alone later for fear of promoting manifold leaks.

Thinking now this is excessive caution.....but it begs a question:  If the jackshaft is removed by removing it's four main bolts/screws, should the 8 other manifold bolts be loosened and ultimately re-tightened in proper sequence, or should they just be left alone, to minimize possible disturbance to manifold sealing surfaces?

I can see an argument for either option, anybody end up with a leak after R&R of a jackshaft? Thanks! Nate

Last edited by nate
×
×
×
×