Reply to "Mangusta Engine Removal and Rebuild"

mkehMember

@mangusta luckily the long bolt was still doing it's job... The nut had come off and the bolt was sliding forward... Not sure if all the access panels kept it in place, or just luck... Either way, i'm glad it was still there...

Apparently the X1/9 had several tie rod changes over the years, but I did find a thread on here with the part # (might have been one of your threads!!!)...

Most of the previously listed sources for the ball joints no longer carry them, midwest-bayless.com THINKS they have the 40mm... They are going to check it and let me know...

2/20/237:19 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...