Reply to "Mangusta Front Truck (Frunk) panels"

mkehMember

Yep, Gary had purchased a sheet of aluminum large enough, Lee loaned me his original and I traced and cut out the basic shape... Then I marked where the "bumps" for the bleeders needed to be and cut a 2" hole in a piece of 2x6 and placed a cue ball under the sheet in that spot, aligned the 2x6 hole over it and went to town on the 2x6 to get the bumps... Worked like a charm... Then sprayed it with wrinkle paint and moved on top the next project.

Had to fab up a replacement for the missing piece the heater leaver goes through... Traced-n-banged that out by covering Lee's original with painters tape, then transfer the tape pattern to a fresh sheet of aluminum, traced it out, cut and folded, then more wrinkle paint...

Lucky for us DeTomaso used a lot of simple patterns...

3/4/238:59 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...