Skip to main content

Reply to "Seeking advice regarding the weatherstripping for the Mangusta engine compartment"

From this last picture, sounds like the amended list should be:



1- the body from drivers to passenger side around fire wall is as pictured in the diagram (and pics of 1046) - both rubber seal and aluminum trim together

2- the first 8 inches or so on the lower body from the front to the latching plate and then another short section from the rear of the latching plate to wheel well is just aluminum trim and no rubber seal

3- the lower body from over the arches to the rear is rubber seal with no aluminum trim

4- the side edges of the gullwing engine covers have only rubber seal except for arch sections which have nothing.
×
×
×
×