Reply to "Master and power booster assembly"

Wilkinson was probably adamant about preload between the booster and master cylinder. Some preload is needed to reduce brake pedal travel. Not enough preload results in a lot of pedal travel. Too much preload feels great when pressing the pedal until the brake system heats up when driving and the brakes do not release. When this happens the car will not budge. I am guilty of trying more and more preload to get nice brake response.

Preload adjustment is done in the front trunk, not under the dash.

1/13/2210:43 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...