Reply to "Master Cylinder"

TRY BENCH BLEEDING THE MASTER CYL. YOU SHOULD BE ABLE TO DO THIS ON THE CAR. YOU CAN BUY KITS THAT GIVE YOU THE PARTS TO DO IT. BLEED BACK INTO THE CUP UNTIL YOU SEE NO BUBBLES.THIS SHOULD BE DONE BEFORE YOU BLEED AT THE LINE. ALSO MAKE SURE THAT THE CONNECTION ON THE SLAVE CYLINDER IS REALLY TIGHT. THE PROBLEM THAT I HAD WAS BECAUSE THE INLET PIPE INTO THE SLAVE WAS LOOSE. ALSO PUT SOME TEFLON TAPE ON THE BLEEDER. I CAN DEFENITLY FEEL YOUR IRRITATION. I FOUGHT MINE FOR TWO DAYS. ALSO MAKE SURE THAT THE THROW IS FAR ENOUGH ON YOU MASTER.