Reply to "Melted through wiring - advice needed"

garth66"When speed is the only thing that counts"

See this page for a picture of the wire connector block located above the steering column.
http://www.banzairunnerpantera...s_ignitionswitch.htm

The original connector (the black one in the pictures) has screws that grind directly into the wire strands, shearing many of them resulting in a poor connection with lots of resistance - note that the connector was beginning to melt on one side (I've seen others that were much worse!). I replaced it with a proper connector that has a sheath that clamps down on the wire strands without breaking them, creating a much more positive connection without the resistance of the old connector.

3/25/159:47 PM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...