Reply to "Melted through wiring - advice needed"

panteradougMember

DON'T pull the dash UNLESS you positively HAVE TO!
Theoretically it is no big deal. The reality varies accordingly.
The dual pod IS easier than the single pod by A LOT!

It definitely is not intended for humans to do this. There MUST have been special tooling for the factory back then. Had to have been.

The biggest problem FOR ME is that the speedometer cannot be mounted to the dash before re-installation BECAUSE there is a mounting bracket for the dash to the car body directly behind it and the only way to access that is through the speedometer mounting hole.

That makes re-mounting (getting the inner nut on the speedometer) the closest thing to impossible that I have ever seen.

I AM STILL trying to figure that one out. I may have to fly in Bosswrench to do it for me? He knows the secret.

3/28/159:00 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...